Pedders Full 40mm Suspension Lift Kit - (Pre-Assembled struts)

A tried & tested Australian Pedders 40mm suspension lift kit complete with the coil over front struts all built up, fits Hilux Surf 185 models & Land Cruiser 90 series. 

Whilst improving the vehicle's looks and handling, RoughTrax Pedders lift kit helps to prevent body roll in bends. Ideal for towing, off-road & on-road use whilst giving greater ground clearance allowing fitment of larger tyres.
Coil springs are uprated along with Pedders Heavy-duty twin tube design Gas shock absorbers all manufactured in Australia where they have been tried and tested in the outback terrain!
The larger piston shocks within this Pedders kit means it tends to give a slightly firmer ride than the Monroe / Pedders kit, in turn, performance tends to be more responsive in our opinion.

• As with all suspension shocks/coils supplied, paint is not covered under warranty due to the very nature and position of the component.

Expedition use: Personally we wouldn't recommend any of our kits for expedition use with top loaded roof racks or excessive load, having said this, we have provided all the spring rates for customers to make their own decisions based on their requirements.

Fitting Tip - Only torque the lower shock bolt when the weight is back down on the vehicle - NOT when the suspension is hanging down.

Always ensure your front wheel alignment and geometry is checked after installation.

With this kit, RoughTrax has taken the strain out of building up both handed front struts. With our coil compressing equipment, we've fitted the coil to the shock and aligned the new heavy-duty Pedders top mounting plates to the shock lower mounting ready for you fit, this means correct installation is made easy so in turn will definitely save you on Labour fitting costs.
The affordable, most comprehensive kit on the market.

Our Kit Contains:

For the Front - Come pre-assembled Struts (LH & RH) ready to bolt on and made up of:

• x2 Pedders Gas Sports-Ryder Front Shock Absorber Struts
• x2 Pedders Front Lift Coil Springs Uprated - 605 Lbs/In
• x2 Pedders Heavy Duty Uprated Front Top Mounts.

and for the Rear:

• x2 Pedders Trak-Ryder Gas Rear Shock Absorbers
• x2 Pedders Rear Lift Coil Springs Uprated - 194 Lbs/in

Ride Heights: (based on a standard unmodified vehicle)
The amount of lift can vary pending original vehicles bushes additional accessories etc, below will provide you with a good idea of the ride height after installing the lift kit, from this you can determine the lift the kit will give you against your existing ride height. The vehicle will sit higher at the rear than the front as the front is limited by the ball joint and driveshafts.

Ride heights are taken from the bottom of the wheel rim vertically up to the wheel arch: -
Ride heights are provided from a standard model Hilux Surf KZN185 without any other modifications.
Wheel diameters will affect this ride height so we have provided dimensions with 2 common wheel sizes -
you can adjust dimensions by 12.5mm (1/2") accordingly if running different size wheels.

Front ride height: - bottom of rim up to arch: - usually a 10mm discrepancy
15" rims = 743mm
16" rims = 755mm

Rear ride height: - bottom of rim up to arch: - usually a 10mm discrepancy
15" rims = 788mm
16" rims = 800mm

(SWB 90 L/Cruisers may lift approx more at rear)