Front Exhaust Downpipe Premium Range Hilux Surf KZN130

Exhaust front downpipe without heat shields for the Hilux Surf KZN130 & UK 4Runner with 1KZT & 1KZTE 3.0 TD engine, complete with a 2 year warranty, UK manufactured by TMA Exhausts.

This front exhaust downpipe has now been discontinued from Toyota. TMA have made this exhaust specifically for RoughTrax based on the sample of the original Toyota downpipe. TMA take into consideration all the original bends, flanges & specifications of the original Toyota exhaust fitted from factory.

Quality of this KZN130 downpipe is plain to see with 8mm and 10mm CNC machined flanges and pipe bending using latest technology machinery.

About the guards:
You will need to re-use your original exhaust heat shields if required. The heat shields can easily be un-bolted from the original front down pipe & fixed to this new downpipe as shown in our images (NB. the two bolt guard fixing on the first bend is no longer utilised - just the 3 main clamps around the guards are used)

The exhaust system on the KZN130 is made up of four sections, the downpipe, the second section with the flexi-pipe, followed by the large main silencer, and then the rear tailpipe that exits the rear of the vehicle.

The front downpipe section bolts directly to the manifold, it has a three bolt hole flange fitting at the front and a two bolt hole flange that bolts to the flexi-pipe.

The sealing rings, bolts and other exhaust mountings are sold separately. If required use x2 sealing ring gaskets (EXG3) and the exhaust bolt kit (EXBK2).

A2A exhausts offer original fitment and quality with the original styled machined flanges & superb welding you can be assured you are fitting an OE equivalent quality replacement front exhaust downpipe.

Quality of build:

• All tubing made from 60mm x 1.5mm thick Aluminised steel, again for corrosion protection.
• Complete with quality front exhaust downpipe clamp.
• Embossed Logo with Country of Origin and batch traceability
• 2 Year parts warranty!
• All flanges are either CNC milled or pressed steel to OE specifications
• All pipe bends are carried out with the latest mandrel type pipe bending, the best in the business.
• Endplates where applicable, are dished to provide strength

Couple all this with quality welding and attention to detail and it's easy to see why these are in our opinion the best exhausts on the market, we're also proud to say they are built in the UK!

About TMA Exhausts:
A2A is the brand name of the manufacturer TMA. They are the UK's largest Independent manufacturer of exhausts with a huge processing plant of some 60,000 sq.ft.
They have full ISO 9001 accreditation and Type approval on most systems.
They are also the OE manufacturer in the UK for both Jaguar and Land Rover, what's more, they proudly manufacture the system for Jaguars legendary "E-Type", to top this they are also the 2nd tier supplier to Toyota UK, so you know you're in safe hands with this manufacturer and product range.

More about TMA Exhaust Quality can be found on our blog