Skip to the beginning of the images gallery

In Stock

One Piece Aisin Engine Water Pump with Cast Housing

This pump comes as a one piece with backing housing casting - bolts back to the block

See more detail

Choose your vehicle to ensure compatibility

Choose Vehicle

Rating:

100% of 100

3 Reviews Add Your Review

£74.40 £62.00

Add to Wishlist

Product Code:

CWP004-01

Order before 15:00 GMT weekdays for same day dispatch.

Order by 15:00 mon-fri for same day dispatch.

28 Day returns or exchange.

1 Year Parts Warranty

Details

A brand new One-Piece Aisin engine water pump complete with backing housing designed to bolt back to the block, manufactured by Aisin who are the original manufacturer for Toyota.

Before you buy, please, please, check the Important note below:

Compatible with:
Hilux Pickup - Mk5 KDN165R - 2KDFTV 2.5cc
KZN165 - 1KZTE 3.0cc

Hilux Surf - KZN130 - 1KZTE (& 4Runner) 3.0cc
KZN185 - 1KZTE 3.0cc

Land Cruiser - KZJ70R - 1KZTE 3.0cc
KZJ90/95 - 1KZTE 3.0cc
KDJ90/95 - 1KDFTV 3.0cc
KDJ120/125 - 1KDFTV 3.0cc
KDJ150/155 - 1KDFTV 3.0cc

Please Note:

ONLY BUY THIS PUMP IF YOU OR YOUR FITTER IS PREPARED TO REMOVE YOUR ENTIRE PUMP WITH HOUSING BACK TO THE BLOCK - THIS TAKES CONCIDERABLY LONGER TO FIT THAN JUST THE PUMP.
USE CWP010 IF YOU PREFER JUST TO FIT THE PUMP

The listed models above ALL used a pump (6 bolt fitment) that fitted into an addition alloy backing housing that then bolts back to the actual block i.e a 2-piece, pump with housing.
Aisin's new design 1-piece pump replaces the older 2-piece setup with a more efficient pump and is a direct replacement once your original backing housing has been removed from the block.
This one piece pump will take longer to fit as it requires fitting right back to the cylinder block, removal of all the timing belt and associated parts is necessary as per our images.
Many times fitters have refused to fit this pump claiming they do not fit, this is incorrect, its just that you need to remove the entire pump & housing in order to fit as per images.
If you prefer to simply fit the smaller pump that bolts into the backing outing with 6 bolts then choose water pump Aisin Engine Water Pump without Cast Housing CWP010, again manufactured by Aisin.
Aisin manufacture for Toyota, therefore this engine water pump is as per the original fitment of the original water pump fitted from factory.

The water pump is bolted to the engine, the viscous fan and fan blade then bolts to the water pump. The water pump is complete with a new mounting gasket and mounting studs to mount the viscous fan to the water pump. This controls the engines cooling system by spinning the fan and cooling the radiators which in turn cools the engine down.

Aisin manufacture for Toyota, therefore this engine water pump is as per the original fitment of the original water pump fitted from factory.

RoughTrax are now direct agents for Aisin, therefore pleased to be able to supply this quality Original Equipment (OE) product at a much discounted price.

About Aisin:
Aisin's advanced aluminium die-casting technology allows for size and weight reductions without sacrificing cooling performance. The highest quality materials are used, creating stronger body design and resistance to corrosion. Advanced technological design produces smooth coolant flow channels, efficient rotors, ball bearings, and carbon ceramic mechanical sealing for optimum cooling performance and longevity.

SPECS / Fitments

More Information
Weight	4.000000
Manufacturer	Aisin
MPN (Manufacturer Part Number)	WPT-166V
OE Equivalent Part Number	16100-69355, 16100-69356, 16100-69357, 16100-39485, 16100-39486, 16100-09260, 16100-09261
Warranty Options	1 Year Parts Warranty
Fitting Position	Bolts to the engine block
Unit of Sale	Individually (x1)
Specs & Fitment	Compatible Engine Codes: 2KDFTV, 1KDFTV, 1KZT & 1KZTE Fuel Type: Diesel Engines Only

Compatible Vehicles

Vehicle Compatibility

Below are a list of compatible vehicle for this product.

SERVICE KITS for your Toyota

You have not selected a Toyota model to filter these products yet.

Choose your vehicle to ensure compatibility

Change Vehicle

Delivery and Returns

Delivery Information - Cut-off Time 15:00 Monday-Friday

> Click here for our Opening Hours and Delivery Times

Free Delivery - Orders Over £90 (Online Orders Only / 2-5 day service) subject to Terms & Conditions*

At checkout enter your delivery Postcode - the available options and charges will be provided depending on the product and location prior to any purchase.

*Excludes Islands and some Scottish postcodes where surcharges apply, click here for exclusions. Free delivery is not valid on any telephone order.

PLEASE NOTE: Orders placed before 15:00 weekdays will be dispatched on the same day subject to stock and points below. Orders placed after 15:00 on Friday or over the weekend will be dispatched on the following Monday.

If you wish to make any additions or alternations to your initial order you will need to let us know before 12.00 noon.

We are closed over Bank Holidays.

For full details please visit to our Deliveries page.

International Delivery – Cut-off 12 Noon Monday-Friday

RoughTrax offers fast, reliable, and affordable service as standard, we make sending your international order easy with an online tracking system sent straight to your email once despatched.

To confirm a delivery price simply add products to your basket, select your country and enter your postcode in the delivery field. The website will automatically calculate your delivery price. Goods can be sent worldwide.

All International orders are sent with FedEx, Parcelforce or DHL depending on the product/s & service you have selected.

For full details please visit our International Deliveries page.

Arrange Own Courier

If a delivery method is not available, an option of “Arrange My Own Courier” will display. This enables you to order through the website and arrange your own courier for your goods to be collected directly from RoughTrax in Bristol, UK.

For full details please visit to our Arrange My Own Courier page.

Returns

At RoughTrax we know that sometimes you will need to return items.

All products must be re-sellable and returned along with the original packaging and documents. (Stock to order or Special order items are non-returnable).
Goods must be returned within 28 days of purchase as per our Terms and Conditions
Products must be returned to RoughTrax at RoughTrax Ltd, Units 4-7 Pixash Business Centre, Pixash Lane, Keynsham, Bristol. BS31 1TP United Kingdom

If Returned parts that qualified for Free Delivery.

If you return a product(s) that qualified you for Free Delivery and the remainder of your order does not exceed the £90 Free Delivery Promotion, then RoughTrax reserve the right to charge carriage for the remaining products purchased to cover the carriage cost.

Please visit our Returns page to download a returns form and for further information.

Product Reviews

Write Your Own Review

Only registered users can write reviews. Please Sign in or create an account

Questions

Questions & Answers for One Piece Aisin Engine Water Pump with Cast Housing

Do I need anything else when fitting a pump?
You may want to use a thin film of silicone sealant either side the gasket and of course, new coolant is always a good idea.

My pump appears smaller than this pump?
Some earlier models had a separate small pump that fitted into an alloy backing housing behind, this then fitted to the block. Aisin (for Toyota) redesigned this setup to a more efficient one piece pump that simply bolts straight to the block. It's a direct replacement and becomes obvious once the old one is removed.

Download

Product Info: CWP004 - One Piece Water Pump