Local Storage seems to be disabled in your browser.
For the best experience on our site, be sure to turn on Local Storage in your browser.
In Stock
Genuine Toyota Rear Inner Axle Oil Seal KUN25 & KUN26 Upto Mid 2008
Fits Chassis - MRO - Upto 08/2008 and AHT Upto 10/2008 See more detail
Choose your vehicle to ensure compatibility | Choose Vehicle |
£13.20 £11.00
Add to Wishlist
Product Code:
OSRA015
Order by 15:00 mon-fri for same day dispatch.
28 Day returns or exchange.
1 Year Parts Warranty
A Genuine Toyota NOK butadiene rubber rear inner axle oil seal for the Hilux Pickup models KUN25 & KUN26 from 2005- mid-2008 dates as listed below and fits the earlier 50mm outer diameter retaining collar, comes pre-greased by Toyota for initial running in.
Compatible with chassis numbers starting;
MR0 - UP TO>August/2008 &
AHT - UP TO>October/2008
Fits directly into the axle casing, it is revealed when you remove the complete rear half shaft.
Its purpose is to stop the flow of oil from leaving the differential casing and contaminating the bearing and brake shoe area.
The tough rigid metal cased nitrile butadiene rubber (NBR) provides the best possible seal to the axle housing. Nitrile butadiene rubber seals have an outstanding resistance to oils, fuels, heat & abrasion, and of course being a Genuine seal you're guaranteed quality and fit.
Seal fitting Tips:
- Extreme care must be taken when removing and fitting any oil seal but especially this one. Never remove by driving a screwdriver between the seal and the casing it fits into, oil could pass by any marks on the casing.
- Always clean the area the seal will fit into, brake & clutch parts cleaner is excellent for this. Make sure the seal fits squarely into the casing and never damage a seal on assembly, a deformed seal will leak.
- The oil seal will have a spring on the lip side of the seal, always fit a seal with the spring against the flow of oil it’s holding back and make sure it doesn't come off when tapping in a new oil seal.
- Always smear any oil seal with a light film of the oil it's holding back, this will prevent the seal from getting hot on initial use and causing early failure.
- And finally check your axle breather on top the casing, if blocked this can cause oil to be forced pass an oil seal.
Making sure a few fundamental precautions are carried out when fitting this seal will certainly prolong the life and prevent the seal from leaking again.
| Weight | 0.030000 |
|---|---|
| Dimensions | 50mm x 70mm x 9mm |
| Manufacturer | Toyota |
| MPN (Manufacturer Part Number) | 90310-T0006 |
| OE Equivalent Part Number | 90310-T0006, |
| Warranty Options | 1 Year Parts Warranty |
| Date Codes | Upto Mid 2008 - Please check description |
| Fitting Position | Rear |
| Unit of Sale | Individually |
| Specs & Fitment | Compatible with Chassis Numbers Starting: Inner Diameter: 50mm Outer Diameter: 70mm Width: 9mm Material: Nitrile Butadiene Rubber (NBR) |
Vehicle Compatibility
Below are a list of compatible vehicle for this product.
SERVICE KITS for your Toyota
You have not selected a Toyota model to filter these products yet.
Choose your vehicle to ensure compatibility
Change VehicleDelivery Information - Cut-off Time 15:00 Monday-Friday
> Click here for our Opening Hours and Delivery Times
Free Delivery - Orders Over £90 (Online Orders Only / 2-5 day service) subject to Terms & Conditions*
At checkout enter your delivery Postcode - the available options and charges will be provided depending on the product and location prior to any purchase.
*Excludes Islands and some Scottish postcodes where surcharges apply, click here for exclusions. Free delivery is not valid on any telephone order.
PLEASE NOTE: Orders placed before 15:00 weekdays will be dispatched on the same day subject to stock and points below. Orders placed after 15:00 on Friday or over the weekend will be dispatched on the following Monday.
If you wish to make any additions or alternations to your initial order you will need to let us know before 12.00 noon.
We are closed over Bank Holidays.
For full details please visit to our Deliveries page.
International Delivery – Cut-off 12 Noon Monday-Friday
RoughTrax offers fast, reliable, and affordable service as standard, we make sending your international order easy with an online tracking system sent straight to your email once despatched.
To confirm a delivery price simply add products to your basket, select your country and enter your postcode in the delivery field. The website will automatically calculate your delivery price. Goods can be sent worldwide.
All International orders are sent with FedEx, Parcelforce or DHL depending on the product/s & service you have selected.
For full details please visit our International Deliveries page.
Arrange Own Courier
If a delivery method is not available, an option of “Arrange My Own Courier” will display. This enables you to order through the website and arrange your own courier for your goods to be collected directly from RoughTrax in Bristol, UK.
For full details please visit to our Arrange My Own Courier page.
Returns
At RoughTrax we know that sometimes you will need to return items.
- All products must be re-sellable and returned along with the original packaging and documents. (Stock to order or Special order items are non-returnable).
- Goods must be returned within 28 days of purchase as per our Terms and Conditions
- Products must be returned to RoughTrax at RoughTrax Ltd, Units 4-7 Pixash Business Centre, Pixash Lane, Keynsham, Bristol. BS31 1TP United Kingdom
If Returned parts that qualified for Free Delivery.
If you return a product(s) that qualified you for Free Delivery and the remainder of your order does not exceed the £90 Free Delivery Promotion, then RoughTrax reserve the right to charge carriage for the remaining products purchased to cover the carriage cost.
Please visit our Returns page to download a returns form and for further information.
Write Your Own Review
Related Parts
Check items to add to the cart or
Also Recommended
