Local Storage seems to be disabled in your browser.
For the best experience on our site, be sure to turn on Local Storage in your browser.
Double Front Swivel & Hub Seal Kit
Choose your vehicle to ensure compatibility | Choose Vehicle |
Add to Wishlist
Order by 15:00 mon-fri for same day dispatch.
28 Day returns or exchange.
1 Year Parts Warranty
RoughTrax new front hub and swivel overhaul seal kit for the Land Cruiser KZJ70 & LJ70, fits from January 1990 onwards as listed with solid front axles. Kit now contains Genuine Toyota swivel seals & Inner drive shaft seals (the parts that always fail!) various Karsons gaskets and NSK 30303 Bearings all as listed below.
Our new kit now comprises of very high-quality parts, in fact many are Genuine Toyota & NSK components whilst the remaining components are all from one of most respected aftermarket suppliers Karsons.
Please note:
The free wheeling hub gasket is not supplied with this kit, the 70 Series can be fitted with or without free wheeling hubs, these gaskets can be purchased separately.
It is very common for the swivels housings to leak oil, this usually ends up with oil on the wheel/tyre which is an MOT failure, so this kit will have the very best parts to ensure a complete and thorough repair for both front hubs. In the questions section, we have added some advice.
Below shows all the brands and components that make up our Double Swivel Hub seal kit:
Kit Contains;
- 4x NSK (Swivel Hub bearings 30303 - pivot bearings that support the main hub (top and bottom)
- 2x Genuine Toyota Swivel seal hub kits (felt/rubber/steel seals (43204-60041)
- 2x Genuine Toyota Stub axle gaskets - 8 hole (Large gasket - fits stub axle to knuckle swivel hub)
- 2x Genuine Toyota Stub axle gaskets - 8 hole (fits behind large 8 hole dust seal)
- 2x Genuine Toyota Front main hub round gaskets
- 2x Genuine Toyota Inner axle oil seals 90310-35010 - small seals that fit into the casing, run on the half shaft stopping diff oil entering the hub - no aftermarket even comes close to the quality of these Original seals
- 2x Karsons Stub axle dust seals - Large dust seal with metal shield and rubber insert
- 2x Karsons LYO Main wheel bearing seals - fits into hub stopping wheel bearing grease exiting
- 1x Karsons Swivel shim kit - 8x shims ranging from 0.1mm up to 1.0mm (2 of each) - preloads the swivel bearings and set hub position
- 2x Karsons Locking Tabs - Fits between the wheel bearing lock and adjust nuts
Also recommended with the seal kit would be
- Use one tub of CV Grease each side.
- our 54mm Box Spanner 54mm extended box spanner.
- Differential oil
Kit fits:
KZJ70 & LJ70 Mk2 from January 1990-1993 with Square headlamps.
Weight | 1.590000 |
---|---|
Manufacturer | RoughTrax |
MPN (Manufacturer Part Number) | OSKIT007 |
OE Equivalent Part Number | 04434-60030, 04434-60031 |
Warranty Options | 1 Year Parts Warranty |
Date Codes | From 01/1990 on |
Fitting Position | Front |
Unit of Sale | 1 kit fits both sides |
Vehicle Compatibility
Below are a list of compatible vehicle for this product.
- Toyota Land Cruiser LJ70R 2.4cc (2LT) Turbo Diesel RHD (G - K reg, 1/1990-5/1993) UK
- Toyota Land Cruiser LJ71 2.4cc (2LTE) Turbo Diesel RHD (G - K reg, 1/1990-5/1993) Import
- Toyota Land Cruiser LJ78 2.4cc (2LTE) Turbo Diesel RHD (G - K reg, 4/1990-5/1993) Import
- Toyota Land Cruiser KZJ70R 3.0cc (1KZT) Turbo Diesel RHD (K - N reg, 5/1993-4/1996) UK
SERVICE KITS for your Toyota
You have not selected a Toyota model to filter these products yet.
Delivery Information - Cut-off Time 15:00 Monday-Friday
> Click here for our Opening Hours and Delivery Times
Free Delivery - Orders Over £90 (Online Orders Only / 2-5 day service) subject to Terms & Conditions*
At checkout enter your delivery Postcode - the available options and charges will be provided depending on the product and location prior to any purchase.
*Excludes Islands and some Scottish postcodes where surcharges apply, click here for exclusions. Free delivery is not valid on any telephone order.
PLEASE NOTE: Orders placed before 15:00 weekdays will be dispatched on the same day subject to stock and points below. Orders placed after 15:00 on Friday or over the weekend will be dispatched on the following Monday.
If you wish to make any additions or alternations to your initial order you will need to let us know before 12.00 noon.
We are closed over Bank Holidays.
For full details please visit to our Deliveries page.
International Delivery – Cut-off 12 Noon Monday-Friday
RoughTrax offers fast, reliable, and affordable service as standard, we make sending your international order easy with an online tracking system sent straight to your email once despatched.
To confirm a delivery price simply add products to your basket, select your country and enter your postcode in the delivery field. The website will automatically calculate your delivery price. Goods can be sent worldwide.
All International orders are sent with FedEx, Parcelforce or DHL depending on the product/s & service you have selected.
For full details please visit our International Deliveries page.
Arrange Own Courier
If a delivery method is not available, an option of “Arrange My Own Courier” will display. This enables you to order through the website and arrange your own courier for your goods to be collected directly from RoughTrax in Bristol, UK.
For full details please visit to our Arrange My Own Courier page.
Returns
At RoughTrax we know that sometimes you will need to return items.
- All products must be re-sellable and returned along with the original packaging and documents. (Stock to order or Special order items are non-returnable).
- Goods must be returned within 28 days of purchase as per our Terms and Conditions
- Products must be returned to RoughTrax at RoughTrax Ltd, Units 4-7 Pixash Business Centre, Pixash Lane, Keynsham, Bristol. BS31 1TP United Kingdom
If Returned parts that qualified for Free Delivery.
If you return a product(s) that qualified you for Free Delivery and the remainder of your order does not exceed the £90 Free Delivery Promotion, then RoughTrax reserve the right to charge carriage for the remaining products purchased to cover the carriage cost.
Please visit our Returns page to download a returns form and for further information.
Fitting Guide: General Hub Breakdown Layout