Pedders Suspension Lift Kit +45-50mm Air Suspension Conversion kit

A tried & tested Australian Pedders +45-50mm suspension lift kit for the Land Cruiser 120 series, used to convert rear air-suspension models to coils whilst lifting the Land Cruiser, what's more, we have pre-assembled front struts ready to bolt straight in!

Nb: Kit can also be used for LC3 & LC4 models originally fitted with coils - generally you would use your own cone type rear bump stops.

The 120 Series Land Cruiser air suspension system can be an expensive fix should even a sensor or shock absorber fail, convert your air suspension or standard coiled suspension with this extended 45-50mm lift kit.

Whilst improving the vehicle's looks and handling, RoughTrax Pedders lift kit helps to prevent body roll in bends. Ideal for towing, off-road & on-road use whilst giving greater ground clearance allowing fitment of larger tyres. 

Coil springs are uprated along with Pedders Heavy-duty twin tube design Gas shock absorbers all manufactured in Australia where they have been tried and tested in the outback terrain!
The larger piston shocks within this Pedders kit means it tends to give a slightly firmer ride, in turn, performance tends to be more responsive in our opinion.

Fitting Tip - Only torque the lower shock bolts when the weight is back down on the vehicle - NOT when the suspension is hanging down.

• As with all suspension shocks/coils supplied, paint is not covered under warranty due to the very nature and position of the component.
• Always ensure your front wheel alignment and geometry is checked after installation.

With this kit, RoughTrax has taken the strain out of building up both handed front struts. With our coil compressing equipment, we've fitted the coil to the shock and aligned the new heavy-duty Pedders top mounting plates to the shock lower mounting ready for you fit, this means correct installation is made easy so in turn will definitely save you on Labour fitting costs.
An affordable, comprehensive kit from a major Australian Suspension supplier.

Our Kit Contains:

For the Front - Come pre-assembled Struts (LH & RH) ready to bolt on and made up of:

• x2 Pedders Gas Sports-Ryder Front Shock Absorber Struts
• x2 Pedders Front Lift Coil Springs Uprated - 771 Lbs/In
• x2 Pedders Heavy Duty Uprated Front Top Mounts.

and for the Rear:

• x2 Pedders Trak-Ryder Gas Rear Shock Absorbers
• x2 Pedders Rear Lift Coil Springs Uprated - 267 Lbs/in
• x2 Rear bump stops
• x2 Genuine Toyota spring Insulators (Black)

In our "Download" tab are Pedders complete detailed instructions to disable the air suspension electrics to ensure that no warning lights are displayed after fitment which is essential for MOT’s.

• Pedders Rear red coil insulators (EP8316/20) listed in the "General fitting guides" are NOT used with the rear lifted coils 7839 within this kit, instead we now include the Genuine Toyota Black insulators

Approx. Rear Ride Height:-  taken from the bottom of the wheel at rim vertically up to wheel arch; Usually a 10mm discrepancy (see image)
A good tip is to put a jack under the chassis / tow bar to replicate the height before ordering

16" rims = 822mm
17" rims = 835mm